Below is a group product of Network Communication Device.
Product List
Having two row of LEDs, upper row indicate local status, lower row indicate remote status and alarm status. ...
[Last Updated: 2009-09-28]
General information: This fiber modem is small and easy use, solve the problem of traditional RS232/422/485 ...
[Last Updated: 2009-09-28]
Based on self-copy right IC; provide 2 types of clock: fiber recovery clock, master clock; Ethernet ...
[Last Updated: 2009-09-28]
Two row of LEDs, upper row indicate local status, lower row indicate remote status and alarm status. Based ...
[Last Updated: 2009-09-28]
Based on self copyright IC. Provide 2 loop functions:
ANA: E1 self-loop at local end. DIG: Ethernet ...
[Last Updated: 2009-12-01]
Realizes monitor of remote equipment from local equipment. Two rows of LEDs, upper row indicates local ...
[Last Updated: 2009-09-28]
Product Characters:
Based on self-copyright IC. Semi/full duplex self adapt, support VLAN. RJ45 ...
[Last Updated: 2009-09-28]
General informations:
This converter provide conversion from ITU-T G. 703 E1 channel to Ethernet ...
[Last Updated: 2009-09-28]
Realize transparent transfer Ethernet data in 1 E1 channels. 10M/100M Ethernet and full/half duplex self ...
[Last Updated: 2009-09-28]
Can realize transparent transfer Ethernet data in 1 to 8 E1 channels. 10M/100Mbps Ethernet, full/half ...
[Last Updated: 2009-09-28]
General information: this convertor provide conversion from ITU-T G.703 E1 channel to Ethernet interface. ...
[Last Updated: 2009-09-28]
Clock type: inner clock, E1line clock, V.35 outer clock. Based on self-copyright IC. Hardware can realize ...
[Last Updated: 2009-09-28]
Characters: Based on self-copyright IC. 10M/100M Ethernet, full/half duplex self adapt, support VLAN. ...
[Last Updated: 2009-09-28]
RS232 rating: 0-115.2K self adapt. Provides two loop functions: E1 local loop, RS232 local loop. Positive ...
[Last Updated: 2009-09-28]
Saving two row of LED, upper row indicate local status, lower row indicate remote status and alarm status. ...
[Last Updated: 2009-09-28]
Realizes this end equipment to the far-end equipment long-distance monitoring(two-row indicating lamp, ...
[Last Updated: 2009-09-28]
General information: transmit N x 64k E1 signal via fiber, realize long distance data and voice signals ...
[Last Updated: 2009-09-28]
Realize monitor of remote equipment from local equipment. Upper row indicate local status, lower row ...
[Last Updated: 2009-09-28]
High integrated design, work stable, very low failure rate. E1 port uses digital clock resume circuit and ...
[Last Updated: 2009-09-28]
Realize monitor of remote equipment from local equipment. Upper row indicate local status, lower row ...
[Last Updated: 2009-09-28]
4E1 fiber optical MUX is a point-to-point optical transmission equipment developed based on ultra large ...
[Last Updated: 2009-09-28]
EB06-FX serial interface converter used back multiplexing technology, transfer 10/100M Ethernet data by E1 ...
[Last Updated: 2009-09-28]
Offer fiber interface, saving devices in net. VALN setting based on Port with no infection to remote ...
[Last Updated: 2009-09-28]
Conforms to IEEE802.3, IEEE802.3u international standard. Ethernet port 10M/100M\half/full duplex ...
[Last Updated: 2009-09-28]
1, 000Mbps transceiver. Ethernet interface has function of auto-MIDX which means straight line/across line ...
[Last Updated: 2009-10-20]
Conforms to IEEE802.3, IEEE802.3u (10Base-T, 100Base-TX, 100BaseT-FX) international standard. Supports two ...
[Last Updated: 2009-09-28]
It is to transmit 32 line bidirectional digital video broadcasting, 1~64 line bidirectional high-fidelity ...
[Last Updated: 2009-09-28]
Transmits 2 lines bidirectional digital video broadcasting, 1 to 2 lines bidirectional high-fidelity audio, ...
[Last Updated: 2009-09-28]